Land Model

The use case for our Land Model Flag Turbine

Our Land-model Flag Turbines offer a flexible solution for decentralized energy generation across a wide range of environments. Their omnidirectional, variable-pitch architecture captures wind from any direction without the need for reorientation, making them particularly well suited to variable and turbulent wind conditions.
Depending on blade size, the current Land-model configuration stands approximately 11 to 13 meters to blade tip. Unlike conventional horizontal-axis turbines, increasing power does not require a proportionate increase in tower height. Flag Turbines scale primarily through rotor width and swept area, allowing higher-output models to remain comparatively low in overall height.
This makes the Land-model well suited to farms, industrial and commercial sites, community energy projects, coastal and remote locations, defence applications and other distributed-energy uses. Multiple units can also be deployed together where site conditions and energy demand justify it, providing a modular and scalable route to on-site wind generation.

Benefits of our Land Model

Size and Energy Output

Our larger Flag Turbines can capture more wind and generate significantly higher amounts of energy, making them more suitable for large-scale energy needs or continuous power supply in off-grid areas.

Low Noise

Wind turbines have a reputation for noise. Low rotational speed and a direct-drive design with no gearbox keep our turbines quiet, making them better suited to sites near homes and workplaces.

Turbulence and Structural Stability

Our turbines are designed to work in turbulent air, so they can be sited closer to buildings and tree lines than conventional propeller-style turbines. A six-legged base spreads the load, and because the torque acts in the horizontal plane, large concrete foundations are not required.

Distributed Energy

Their compact size and ability to work in variable wind make Flag Turbines well suited to decentralized, small-scale renewable energy systems, including off-grid sites, small communities and individual businesses.

Low Visual Impact

Flag Turbines Land-model Design has a lower profile and less visually obtrusive design, which is important for maintaining the aesthetic appeal.

Wind Flow and Efficiency

On open land, our Flag Turbines have greater access to steady, unobstructed wind, resulting in higher and more consistent power generation.

Bird & Bat Friendly

Bird and bat safety is built into the design. The blades turn slowly, at 20 to 30 rpm, and are four to five times larger than a conventional turbine’s, so they are easy to see. They move horizontally across the line of sight, not vertically through flight paths.

Start Small, Grow Big

Flag Turbines Products can be easily scaled for different power needs, from small residential installations to larger setups for commercial buildings, providing greater flexibility in your energy generation.

Easy Access, Easy Maintenance

The components of the Land-model Flag Turbines are lower to the ground, making maintenance easier and safer.

Sustainable

Our turbines avoid rare-earth magnets and large, solid composite blades. Their modular construction allows parts to be repaired or replaced rather than the whole turbine, and they are designed to be recyclable at end of life.

Delivery and setup process

Technical Information

Dimensions (m, d x h): 6 x 8
Weight (kg): 500 kg
Connection: Three-phase (3 × 25 A or more), with 100 kWh battery storage
Generator power (kW): 20
Full power from: 13 m/s
Maximum wind: 37 m/s
Brake: Aerodynamic from 40 rpm, plus mechanical